5ST 5-R

Type 5ST / 5STP Time-lag Fuse Series (Low Breaking Capacity) 5ST/5STP Series, 5x20mm Glass Tube Time-lag Fuse RoHS Compliant Description 5x20mm Time-lag, low breaking capacity, glass tube body cartridge fuse designed, approved and complied with IEC 60127-2,standard sheet 3. Features - Meet IEC standard 60127-2, sheet 3 Wide operating temperature range Bulk and Tape & Reel packing available Full compliance with EU Directive 2011/65/EU and amending directive 2015/863 Halogen Free Lead Free Applications Provide individual protection for components or internal circuits. - Power supplies - Battery charger - Monitor LEAD FREE = - Adapter HALOGEN FREE = Physical Specifications Body : Glass Materials Cap : Nickel Plated Brass Caps Leads : Matte Tin Plated Copper On Fuse : “bel”, ”T”, ”Current Rating”, “L”,”250V”, ”Appropriate Safety Logos”, ”  ”（ RoHS compliant） Marking On Label : "bel", "5ST”or”5STP",”T”,"Current Rating", “L“,"Voltage Rating", "Interrupting Rating","Appropriate Safety Logos" and " Electrical Characteristics (IEC-127-2 STANDARD SHEET 3) 1.5 In 2.1 In 2.75 In 4 In 10 In Rated Current 125mA to12.5A 1 2 200 10 40 3 10 Safety Agency Safety Agency Certificate 300 SE-S-2002330 1 2 600 10 150 3 20 300 40000507 hr. min. ms sec ms sec ms ms E20624 In clause 9.2, the test voltage for 5STP ratings from 63mA to 6.3A is 63VDC. "(China RoHS compliant). Safety Agency Approvals MIN MAX MIN MAX MIN MAX MIN MAX 63mA to100mA ", " Ampere Rating/ Voltage Rating 63mA-6.3A/250V AC@35A or 10 In whichever is greater 63mA-10A /250V AC LR39772 Self-declaration No: 2020970207000129 Ampere Range / Volt @ I.R. ability* 63mA-10A/250V AC@35A or 10 In whichever is greater 63mA-6.3A/250V AC@35A or 10 In whichever is greater *I.R.= Interrupting Rating = Short Circuit Rating(Amps) Specifications subject to change without notice belfuse.com/circuit-protection Type 5ST / 5STP 2/4 Environmental Specifications Shock Resistance MIL-STD-202G, Method 213B, Test Condition 1 (100 G's peak for 6 milliseconds; Sawtooth waveform) Vibration Resistance MIL-STD-202G, Method 201A (10-55 Hz, 0.06 inch, total excursion). Salt Spray Resistance MIL-STD-202G, Method 101E, Test Condition B (48 hrs). Insulation Resistance MIL-STD-202G, Method 302, Test Condition B (After Opening) 100,000 ohms minimum. Solderability MIL-STD-202G, Method 208H Resistance to solder Heat MIL-STD-202G, Method 210F, Test Condition B (260+/-5℃,10+/-1 sec) Thermal Shock MIL-STD-202G, Method 107G, Test Condition B (-65℃ to +125℃). Operating Temperature -55℃ to +125℃ Terminal Strength IEC-68-2-21 Electrical Specifications Typical Cold Volt-drop Resistance @100%In (ohms) (Volt) max. Voltage and Interrupting Ratings Maximum Melting I²T Melting I²T Power